Best Service Manual Source for DIY repairs

Forum - Outboard Motors - Johnson/Evinrude Marine engines

Johnson/Evinrude Marine engines forum   Outboard Motors maintenance and repair forumCreate new thread
previous < 1  2  3 > next

A 1975 50 HP johnson idles rough at a low idle but smooths out at high RPM. posts: 7

I have a 1975 50 HP johnson outboard. It idles rough at a low idle but smooths out at high RPM...
Thread created by: Austin on Tuesday, March 30 2010 at 10:36:44 CDT

70 johnson - shifting adjustment posts: 3

I changed out the lower unit on a 70 johnson, can't get the shifting adjusted.
Should the shifting rod be turned out so many turn or can I make adjustment with something els..
Thread created by: Sally on Wednesday, March 24 2010 at 14:53:16 CDT

2000 Johnson 150HP outboard over-heated posts: 2

I have a 2000 Johnson 150 hp outboard motor. Last week, it over-heated, I shut it down right aw..
Thread created by: Ron on Friday, May 7 2010 at 21:23:57 CDT

1972 johnson model 65ESL72S was running fine and then quit. posts: 6

I have a 72 johnson model 65ESL72S. I was running the boat and the motor quit. I found the wire..
Thread created by: CJ on Monday, April 12 2010 at 14:41:00 CDT

I have an old Johnson 25 HP outboard motor. The motor starts but runs ruff. posts: 2

There are two plugs and when I remove the lower plug there seens to be gas and oil in the cylin..
Thread created by: keith on Wednesday, March 31 2010 at 19:21:53 CDT

40HP Johnson - I can not get the lower end to lift up posts: 12

My 40 HP Johnson outboard and boat has been sitting on the boat lift due to the low water level..
Thread created by: Billy on Thursday, March 25 2010 at 15:07:49 CDT

9.5 hp outboard how do I locate and replace impeller? posts: 7

I have a 1969 Johnson 9.5 hp outboard
Thread created by: berry on Thursday, March 18 2010 at 08:58:09 CDT

Lower unit gearcase - will this fit an outboard Johnson 120 looper? posts: 6

LOWER UNIT GEARCASE. FITS V-4 JOHNSON OR EVINRUDE. YEAR MODELS 1988-1994 It has a 20" shaft
Will this fit an outboard Johnson 120 looper? What lenth shaft do I have?
Thread created by: seaman on Thursday, March 25 2010 at 09:45:34 CDT

Replacing a water pump on 85 hp Johnson posts: 6

My son bought a boat with an 85 hp Johnson outboard motor on it. He is trying to replace the wa..
Thread created by: Sue on Wednesday, March 24 2010 at 21:41:17 CDT

I need a new lower unit. posts: 6

I have a 93 Johnson 250 outboard. It needs a new lower unit. Will a 200 Evinrude lower unit fit..
Thread created by: Bil on Wednesday, March 24 2010 at 18:01:05 CDT

previous < 1  2  3 > next

Forum -> Outboard Motors -> Johnson/Evinrude Marine engines

Secure Site by Norton Check My Site on ScamAdviser.com